CM-2300d Color Meter
Designed for versatility in various applications, the CM2300D color meter is a portable integrating sphere color meter incorporating Numerical Gloss Control. The CM-2300d is a high performance, low cost, portable colorimeter ideal for measuring paints, plastics, automobiles, ceramics, architectural interiors, textiles, paper, food, etc.
Model:CM-2300d
Illumination/observation system:
d/8 (diffuse illumination, 8-degree viewing), equipped with simultaneous measurement of SCI (specular component included)/ SCE (specular component excluded) Conforms to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7 and JIS Z8722 Condition C standard
Sphere Size:
d52mm
Light-receiving element:
Silicon photodiode array
(dual 40 elements)
Spectral separation device:
Diffraction grating.
Wavelength range:
360 to 740nm
Wavelength pitch:
10nm
Half bandwidth:
Approx. 10nm
Reflectance range:
0 to 175%; resolution: 0.01%
Light source:
2 Pulsed xenon lamps (X4)
Measurement time:
Approx. 1.5 seconds (approx. 2 seconds for fluorescent measurement)
Minimum interval between measurements:
3 seconds for SCI/SCE (4 seconds for fluorescent measurement)
Battery performance:
Alkaline manganese: up to 1000 measurements
Measurement/illumination area:
d8mm/ d11mm
Repeatability:
Spectral Reflectance: Standard deviation within 0.2% (380 to 740nm Within 0.4%)
Colormetric values: Standard deviation within ΔE*ab 0.08
Measurement Conditions: White calibration plate measured 30 times at 10-second intervals after white calibration was performed
Inter-instrument agreement:
Within ΔE*ab 0.4 (MAV/SCI) based on 12 BCRA Series II color tiles compared to values measured with master body
Measurement Mode:
Single measurement/automatic averaging of multiple measurements (auto mode: 3, 5, 8 times/manual mode)
Interface:
RS-232C, Standard
Observer:
2/10 degrees (CIE 1931/2°, CIE 1964/10°)
Illuminant:
A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources
Display data:
Spectral value/graph, colorimetric value, color difference value/graph, PASS/FAIL result
Color space / colorimetric data:
L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, XYZ, MI, WI (ASTM E313/CIE), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T, L*a*b*, L*C*h*
Data Memory:
700 (SCI/SCE as a set)
Tolerance judgement:
Tolerance for color difference (both box and elliptical tolerances can be set)
Power Source:
4 AA-size battery or AC adapter
Operating Environment:
5 to 40°C; relative humidity 80% or less wwith no condensation
Storage Environment:
0 to 45°C, relative humidity 80% or less with no condensation)
Size (W x H x D)/Weight:
69 x 96 x 193mm/670 grams
Standard accessories:
White calibration plate, Target mask ?8mm, RS-232C cable, AC Adapter, AA-size battery (x4)
Optional Accessories:
Hard case, Dust cover set, Dust cover, SpectraMagic(software), Zero calibration box
Return to top >
|